Figure 45: Inside securing plates.
Flared edge
toward inner
glass plate
Magnets
Figure 46: Left side securing plate installation.
Make sure
that the
securing
plate is
pushed
right up to
the inside
glass plate.
This will
keep any
vibration to
a minimum
Figure 47: Position securing plate up against the inside glass plate.
Inside securing plates installation
There are two identical securing plates which will mount between the inner and outer front and side
glass plates (Figure 45)
1. Install the inside securing plates into the slots at each end of the fireplace opening and lift up
until they make contact with the magnets which will hold them in place (Figure 46). Keep the
flared edges of the securing plates up against the inside front and side glass plates and gently
push them until the securing plates make contact with the inner glass plates. This will ensure that
the inner glass plates do not vibrate because of the airflow inside the fireplace (Figure 47).
38
031220-60
Architectural Series
100004782
