Tower Hobbies T19005 Safety And Instruction Manual Download Page 7

Page: 7 / 20

Safety and Instruction Manual

Helpline: +44 (0) 844 984 0055

• Do not immerse cords, plugs

or any part of the appliance in

water or any other liquid.

• Do not use the appliance

outdoors.

•

CAUTION:

Never push

products into the meat grinder

by hand. Always use the

included food pusher.DO NOT

run the meat grinder for more

than ten continuous minutes

without allowing a ten minute

interval for the motor to cool.

• Do not grind ginger or other

foods with hard fibre.

• Do not grind hard foods such

as bones or nuts.

• When using the Kubbe

attachment, do not fix the

cutting blade or plate.

• When moving the appliance,

carry the body with both hands.

Do not carry the appliance by

the hopper plate or horn.

• Warning: The cutting blade is

sharp, handle with care.

• Never place your fingers near

the food chute while the grinder

is in operation

• Ensure the appliance is not

placed close to the edge of the

work surface.

• Do not leave unattended during

use.

• In the unlikely event the

appliance develops a fault,

stop using it immediately and

seek advice from the service

department:

+44 (0) 844 984 0055

Summary of Contents for T19005





















Search results

Summary of Contents for T19005

Reviews:

Related manuals for T19005

Brands by name

Popular brands

Tower Hobbies T19005, Safety And Instruction Manual

Search results

Summary of Contents for T19005

Reviews:

Related manuals for T19005

Brands by name

Popular brands