Tower Hobbies T18007BLK, Safety And Instruction Manual

Page: 9 / 12

9
Processed Food Measurement Per batch Time per batch
Egg 2-5pcs 30-70sec
Cheese 125-350ml 20sec
Note: (Emulsifying disc):
• Emulsifying disc can be used to make mayonnaise.
• The processor will not work if the bowl and lid are fitted incorrectly.
• Use the pulse function in short bursts. The pulse will operate for as long as the control is held
in position.
• Reverse the above procedure to remove the lid, attachments and bowl.
• Always switch the unit off before removing the lid.
Stainless Steel Slicing and Grating Disc Assembly:
1. Position the drive shaft onto the motor base.
2. Position processing bowl into the drive shaft and turn clockwise to seat firmly on motor base.
3. Place stainless steel disc onto the drive shaft.
4. Place cover on bowl.
5. Turn cover clockwise until cover interlocks on bowl.
6. Plug in to wall socket.
7. Use pusher to push the food down for processing.
8. Switch on and select a speed.
Note: (Stainless steel slicing and grating disc):
• Push gently when feeding food.
• Pre-cut food into smaller pieces according to the diameter of the feeding tube.
• Feed gradually for better effect.
• The processor will not work if the bowl and lid are fitted incorrectly.
• Reverse the above procedure to remove the lid, attachments and bowl.
• Always switch the unit off before removing the lid.
• Use the shredding side for cheese, carrots, potatoes and foods of a similar texture.
• Use the slicing side for cheese, carrots, potatoes, cabbage, cucumber, courgette, beetroot and
onions.
WARNING: Never remove the lid until the cutting disc has completely stopped.
1.8L Plastic Blender Assembly:
1. Fit the sealing ring into the blade unit ensuring the seal is located correctly.
2. Leaking will occur if the seal is damaged or not fitted correctly.
3. Screw the blade unit anticlockwise into the jug.
4. Place the blender on motor base and turn clockwise to ensure install in position.
5. Add ingredients into the blender.
6. Put lid on and turn clockwise to a lock position. Always check that this is secure.
7. Put the blending cap into the lid and turn clockwise to lock into position. Always check that
this is secure.
8. Plug in to wall socket.
9. Switch on and select a speed.