8
Note:
(Stainless Steel Blade):
•
Use pulse function several times to avoid cutting too fine. Do not run for too long while cutting
hard cheese or chocolate otherwise these materials will overheat and begin to melt.
•
Standard chopping period: 30-60 sec.
•
The processor will not work if the bowl and lid are fitted incorrectly.
•
Use the pulse function in short bursts. The pulse will operate for as long as the control is held
in position.
•
Reverse the above procedure to remove the lid, attachments and bowl.
•
Always switch the unit off before removing the lid.
•
The stainless steel blade is the most versatile of all the attachments.
•
The length of the processing time will determine the texture achieved.
•
For coarser textures use the pulse control.
•
Use the stainless steel blade for cake and pastry making, chopping raw and cooked meat,
vegetables, nuts, pate, dips, puréeing soups and to also make crumbs from biscuits and bread.
•
Cut food such as meat, bread, vegetables into cubes approximately 2cm before processing.
•
Biscuits should be broken into pieces and added to the feed tube whilst the machine is
running.
•
When making pastry use fat straight from the fridge cut into 2cm cubes.
•
Take care not to over-process.
WARNING!
The blade is very sharp, please be careful during assembly and washing.
Plastic Dough Blade Kneading Assembly:
1.
Position the drive shaft onto the motor base.
2.
Position processing bowl into the drive shaft and turn clockwise to seat firmly on motor base.
3.
Place blade adaptor onto the drive shaft.
4.
Place kneading blade onto the blade adaptor.
5.
Turn the kneading blade to the right position.
6.
Place ingredients into processor bowl.
7.
Place cover on bowl, turn clockwise until cover interlocks on bowl.
8.
Place pusher into feeding chute.
9.
Plug in to wall socket.
10. Switch on and select a speed.
Processed Food
Measurement Per batch
Flour / Soft Cheese
≤300g
Egg
≤5pieces
Note:
(Kneading blade):
•
Always attach kneading blade in the bowl before feeding food.
•
Standard kneading period: 30-180 sec.
•
The processor will not work if the bowl and lid are fitted incorrectly.
•
Use the pulse function in short bursts. The pulse will operate for as long as the control is held
in position.
•
Reverse the above procedure to remove the lid, attachments and bowl.
•
Always switch the unit off before removing the lid.
Emulsifying Disc Assembly:
1.
Position the drive shaft onto the motor base.
2.
Position processing bowl into the drive shaft and turn clockwise to seat firmly on motor base.
3.
Place blade adaptor onto the drive shaft.
4.
Place emulsifying disc onto the blade adaptor.
5.
Turn the emulsifying disc to the right position.
6.
Place ingredients into processor bowl.
7.
Place cover on bowl, turn clockwise until cover locks on bowl.
8.
Place pusher into feeding chute.
9.
Plug in to wall socket.
10. Switch on and select a speed.
Summary of Contents for T18007BLK
Page 11: ...11 Notes...
