TOWA SX-590II, Operating Manual

Page: 18 / 68

2. SETTING UP
14
Removing and installing the paper roll for the journal
1. Make sure the Control Lock is in the “R”(Register)
position.
2.
Open the printer cover.
3. Press the arms release button (right) to raise the
printer
arms.
4. Remove the take-up spool and paper roll from the support
(See Fig. 4 ).
5. Take away the right side of reel from the take-up spool.
(See Fig.5 )
6. Make a small fold on the end of new roll paper and feed it around
tabs on the take-up spool (See Fig.6 )
5. Turn the take-up spool to fasten the paper.
6. Clip the right side of reel onto the take-up spool.
7. Place the take-up spool on the right position.
8. Press the J feed key (See Fig. 7 ).
9. Close the printer cover.
Fig.6
Fig.4
Fig.5
Fig.7