TOWA SX-590II, Operating Manual

Page: 17 / 68

2. SETTING UP
13
2). INSTALLING THE PAPER ROLLS
Your cash register features a thermal printer which uses two rolls of 58mm standard thermal paper;
one roll (left side) is for the customer receipt and the other roll (right side) is for the journal record. If a
customer receipt is not required, a paper saving option is available by pressing the [ON/OFF] key on
the keyboard.
Paper Roll
Before installing the paper roll, be sure to do the following to avoid causing a paper jam:
Fig.1
Removing and installing the paper roll for the receipt
1. Open the printer cover.
2. Press the arms release button (left) to raise the printer arms.
(See Fig. 2 ).
3. Remove the roll.
.
4. Drop the new paper roll into the receipt location,
and put the paper end to this side.
5. Press the printer arms (See
Fig. 3 ).
6. Close the printer cover.
* Orient the paper roll so that it rotates in a
counterclockwise direction, as shown in Fig. 1.
NOTE
:
As thermal paper is used, it has right and wrong
side to print. Install the paper roll correctly.
Fig.2
Fig.3