tousek
/ E_SWING-225_42200116 / 30. 03. 2011
- 3 -
1. General
Swing gate operator SWING 225
Characteristics
• electrohydraulic operator for swing gates 230Va.c.
• max. leaf weight 400kg
•
closed hydraulic system
• no bleeder screw
• suitable for subsequent installation
• incl. mounting material
• thermic protection
• duty cycle 30%
•
General characteristics
New or already existing swing gates can be easily and quickly automated with the TOUSEK 225 operator which has been
designed for heavy swing gates and high operating frequencies.
The electrohydraulic operator consists of a quiet-running pump, a powerful single-phase electric motor and a precise
piston-cylinder-unit.
These components are connected by a fully enclosed hydraulic system and contained in an anodized aluminum housing.
Two separate bypass-valves permit the continuous adjustment of the opening and closing forces.
The hydraulically self-locking models provide the safe blocking of the gate in the open and closed position and do normally
not require the installation of an electric lock. However, on some installations it can be necessary to use an additional locking
device, e.g. an electric lock, in order to achieve a secure fixing of the gate wings in the open and closed positions, even if
the self-blocking models are used.
With the non-self-locking models an electric lock secures the gate in its closed position. If desired, the gate can be held
in the open position by additional electromagnets.
An emergency release mechanism permits the manual operation of the gate in case of e.g. a power failure.
Technical Data
Swing gate operator SWING-
225 AEB/29 N
225 NB/29 N
Power supply
230V ± 10%, 50Hz
capacitor
10µF
current consumption
0,9A
max. piston force
3000N
piston speed
10,0mm/s
motor r.p.m
30bar
max. stroke length
285mm
duty cycle
30%
max. leaf weight
400kg
max. leaf width
1,8m
2,5m
blocking with closed gate
●
Art.no.
11210210
11210220
Other
closed hydraulic system • force regulation through bypass valves • emergency release
Note: the max. gate leaf widths are for wind permeable and horizontalgates only!
