2-1. Power cord connection:
Connect the power cord to the AC outlet.
2-2. Power on:
Switch on the main power of your monitor (switch is located next to the AC outlet)
2-3. Input Source VGA (HDMI1/ HDMI2/ HDMI3) Signal cable connection:
Plug one end of the 15-pin signal cable to the video signal connector at the rear of
the PC/laptop system (or engine box) and theother end to the monitor.
Or plug one end of the HDMI signal cable to signal source (PC, laptop, IPC, media
player of any kind with proper HDMI or other out port), and the other end to the
HDMI connector on the monitor.
Tighten the connector screws on both ends of the cable to secure good signal
connection.
2-4. VGA/ HDMI output connection (Optional male to male VGA/ HDMI cable):
Section 3
POWER AND SIGNAL CONNECTIONS
2-1. Power cord connection
2-2. Power on
2-3. Input Source VGA (HDMI1/ HDMI2/
HDMI3) Signal cable connection
2-4. VGA/ HDMI output connection (Optional
male to male VGA/ HDMI cable)
2-5. USB cable connection (for touch monitor
models)
Installing the TouchIT LED Duo
7
