Plug one end of the VGA/ HDMI signal cable to signal source and
theother end to another VGA/ HDMI in connector to daisy-chain,
of cascading, signal to the other monitor.
Tighten the connector screws on both ends of the cable to secure
good signal connection.
2-5. USB cable connection (for touch monitor models):
Plug one end of the USB (B type) cable to the USB (A type)
connector at the rear of the (PC, or, IPC, or, media player), and
the other end to the USB connector on monitor.
There are two USB (B type) connecters, one for dynamic source
(VGA/ HDMI1/ HDMI2) on rear, the other for HDMI3 on side.
Please connect the signal source first, then follow by connecting
USB cable for touch.
8
