Toto WASHLET SW2024, Instruction Manual

Page: 8 / 24

14 15
Preparation
Using the Product for the First Time
2.Turn on the power
1
Insert the power plug.

The wand extends and then retracts.
2
Check that the POWER LED
on the main display is lit up.
Lit
1
3.Open the shuto ff valve
1
Fully open the shuto ff valve.
Shuto ff
valve
If the remote control is secured
(for anti theft)
1
Remove the screw from the
remote control
fi xture.
Remote control
Hanger
Screw
Phillips screwdriver
Wall
(View from side)
2
Remove the remote control
from the hanger.
■
To secure the remote control again
Tighten the screw.
(Overtightening may cause damage to parts
such as the hanger)
1.Insert the battery
1
Remove the remote control
from the hanger.
Remote control
Hanger
2
Open the battery cover and
insert two AA batteries.
Close
Open
Battery cover
●
When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
●
The display goes out when no button on the
remote control is pressed for 5 minute or more.
3
Mount the remote control in
the hanger.
■ About the batteries

Use dry cell, alkaline batteries.

Be sure to follow "Safety Precautions" to prevent
the batteries from rupturing or leaking
fl uid, etc.
(Pages 7, 8)
Introduction