Toto WASHLET SW2024, Instruction Manual, Page: 16 / 24

30 31
Wand
Water fi lter drain valve
Maintenance
Wand
(Approximately once a month)
<If you notice dirt (Wand cleaning) >
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
Extend the wand.

Operate with the buttons on the back side of the
remote control.
(1) Press [MENU].
(2) Use to select "CLEANING".
Press [ENTER].
(3)
Use
to select "WAND CLEANING
MODE ON/OFF".
Press [ENTER].

The wand extends and water sprays out for cleaning.

The wand automatically retracts after about 5 minutes.
2
Wipe with a soft, wet cloth.
Do not pull, push or press the wand with excessive
force. (May cause damage or malfunction.)
3
Press [STOP] on the front side of
the remote control.

The wand retracts.
31
Water fi lter drain valve
(Approximately once every 6 months)
<If you think the water pressure has weakened>
1
Close the shuto ff valve.

The water supply stops.
CAUTION
Do not remove the water fi lter drain
valve while the shuto ff valve is open.
(Otherwise, water may leak out)
2
Extend the wand.

Operate with the buttons on the back side
of the remote control.
(1) Press [MENU].
(2) Use to select "CLEANING".
Press [ENTER].
(3)
Use
to select "WAND
CLEANING MODE ON/OFF".
Press [ENTER] to extend the
wand.
Press [ENTER] again to retract
the wand.
(Release the pressure from the
water supply pipe.)
3
Unplug the power plug.
4
Remove the cover and water
fi lter drain valve.

Loosen the water fi lter drain valve with a
fl at-head screwdriver and then pull it.
Cover
Water Filter Drain Valve
5
Clean with a tool such as a
toothbrush.

Also, remove any dust from inside the hole
of the water
fi lter drain valve.
6
Reinstall the water fi lter drain
valve and cover.

Insert the water fi lter drain valve and tighten
it securely with a fl at-head screwdriver.
7
Insert the power plug.

The POWER LED lights up.
8
Open the shuto ff valve.
Maintenance