Toto WASHLET SW2024, Instruction Manual, Page: 15 / 24

28 29 29
Gap between the Main Unit and the Toilet Lid
(Approximately once a month)
The toilet lid can be removed for thorough
cleaning.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
Unplug the power
plug.
Removing and Reinstalling
D
E
A
B
C
Hold with both
hands
Recess
Hinge
Hinge
Pin
2
Remove the toilet lid.
: Pull the left side outward.
: Disconnect the hinge from the
recess and pull up.
: Disconnect the right side.
3
Wipe with a soft cloth that
has been soaked in water
and wrung-out thoroughly.
4
Reinstall the toilet lid.
: Join the pin and the hinge on the right side.
Slightly tilt the toilet lid to the front.
: While pulling out the left side,
: Mount by joining the hinge with the recess.
* Be careful not to pinch your fi ngers.
5
Open and close the toilet lid
to check the mounting, and
then mount the main unit.
6
Insert the power plug.

The POWER LED lights up.
Gap between the Main Unit and Toilet Bowl
(Approximately once a month)
You can remove the main unit to clean
the top of the toilet bowl and the bottom
of the main unit.
Soft cloth soaked in water Toilet paper, etc. (May cause damage.)
1
Unplug the power
plug.
If the power is not unplugged, the unit may
malfunction or cause a failure or electric shock.
2
Remove the main unit.
•
Do not pull the unit with undue force
(because the water supply hose and power cord are attached).
Main unit removal button
Base plate
Bolt
Pull the main unit toward you
while pressing the button.
3
Clean the gap.
• Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft
cloth soaked in water so that no detergent remains.
4
Mount the main unit.
Click
Base plate
Align the center.
Push the main
unit until a click
sound is heard.
CAUTION
Push the main unit fi rmly
on to the base plate until a
click sound is heard.
(Failure to do so could cause
the main unit to come loose and
fall resulting in injury.)
After mounting, check that the main
unit does not detach even when pulled.
5
Insert the power plug.

The POWER LED lights up.
Maintenance
Maintenance