Water Filter Drain Valve
(Approximately once every 6 months)
<If you think the water pressure has weakened>
1
Close the shutoff valve.
The water supply stops.
CAUTION
Do not remove the water
fi
lter drain valve while the
shutoff valve is open.
(Otherwise, water may leak out.)
Shutoff
valve
2
Press
"Wand CLEAN" button.
Open the wand cover. (Release the
pressure from the water supply pipe.)
3
Switch the breaker on the
distribution board to OFF.
4
Remove the cover and
water
fi
lter drain valve.
Loosen the water
fi
lter drain valve with
a
fl
at-head screwdriver and then pull it.
Cover
Flat-head screwdriver
Water Filter Drain Valve
5
Clean with a tool such as a
toothbrush.
Also, remove any dust from inside the
hole of the water
fi
lter drain valve.
6
Reinstall the water
fi
lter
drain valve and cover.
Insert the water
fi
lter drain valve and use a
fl
at-head screwdriver to tighten it securely.
7
Switch the breaker on the
distribution board to ON.
The "Power" LED lights up.
8
Open the shutoff valve.
(Page 15)
Water Filter Drain Valve
35
Maintenance
