VEIL
INSTALLATION INSTRUCTIONS
SKIRTED 1PC LIGHTING
(
)
S-TRAP 305mm K-1381T-XTS
S-TRAP 400mm K-1382T-XTS
-1-
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information -
.
please leave instructions for the
consumer
·
·
·
-
NOTES
·
·
·
·
·
·
·
·
·
Observe all local plumbing and building codes.
Shut off the water supply.
Seat post holes are on 140mm (5-1/2") centers.
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305mm /400mm roughing-in
dimension.
.
Closet flange must be 305mm/400mm on-center from wall.
Carefully inspect the new fixture for any sign of damage.
For new construction, refer to the dimensions in
for locating the shut-off valve.
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2018).
See Fig. #1
Fig. #1
and Fig. #3
This product complies with Q/KCI-006-2018.
·
·
·
·
·
·
·
·
·
140mm
305mm/400mm(
1)
305mm/400mm
1
3
ASME
A112.19.2-
2018.
Q/KCI-006-2018
(
)305mm........K-1381T-XTS
...........................................K-77070T
(
)400mm........K-1382T-XTS
...........................................K-77070T
ORDERING INFORMATION
Includes
VEIL
400mm .....................K-1382T-XTS
Includes Elongated Slim Seat ................................K-77070T
VEIL Skirted 1PC Lighting 305mm .....................K-1381T-XTS
Elongated Slim Seat ...............................K-77070T
Skirted 1PC Lighting
©
©
Copyright Kohler China Investment Co., Ltd. 2019
2019
WARNING: Risk of personal injury or product
damage
WARNING: Risk of external leakage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
. The fill valve
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC
POST CODE 528137
2
528137
8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA
256410
8
256410
NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC
110400
1
110400
:
POST CODE:
POST CODE:
1371050-T01-A
