4
INSTALLATION PROCEDURE
Within
1/16”
(2mm)
1. Use hacksaw to remove excess
portion of outer plaster guard that
extends from the wall surface. The
space between the convex edge of
the outer plaster guard and the
wall surface needs to be within
1/16” (2mm).
2. Apply silicone caulk uniformly and
cover the gap between the outer
plaster guard and the wall surface.
Make sure adhesive is applied
evenly and not convex to the wall
surface.
3. Remove and discard the inner
plaster guard.
I. Preparing the Trim installation area
Hacksaw
Outer plaster guard
Silicon caulk
Outer plaster guard
Inner plaster guard
WARNING:
●
Keep a neat edge and make
sure no edges are recessed
into the wall surface when
removing the outer plaster
guard for the valve.
●
When cutting, the plaster
guard may get scratched, this
does not adversely affect the
product.
ENGLISH
5
INSTALLATION PROCEDURE
1. Position and insert lining plate according to
the "UP" label on product.
2. Use a screwdriver to manually fasten the
screws on the lining plate.
3. Align and insert the trim through the cartridge
sleeve cover and over the lining plate. Make sure
the water discharge port is facing downward.
4. Keep the trim within 1/16” (1mm) of wall surface.
II. Installation of Trim
Lining plate
Screw
Water discharge
port
Cartridge sleeve
Trim
Water discharge
port
WARNING:
●
Before installing lining plate, perform
a pressure test and verify that both
(HOT and COLD) water valves are
completely open.
●
Pay attention to the direction of
the lining plate when installing.
The water discharge port is
located at the BOTTOM of the
plate.
●
DO NOT apply sealant to lining
plate as this may block water
discharge port. Lining plate
includes a foam sealing strip.
●
When fastening the screws on the
lining plate, make sure to com-
press firmly. There should be no
gap between the lining plate and
the wall surface.
●
DO NOT use an electric wrench to
fasten screws, these should be
tightened manually.
WARNING:
●
DO NOT scratch the cartridge
sleeve when installing the trim.
●
DO NOT apply waterproof caulk
around the trim as this may interfere
with the water discharge port
located underneath the trim.
ENGLISH
