THANK YOU FOR CHOOSING TOTO!
TABLE OF CONTENTS
WARNINGS
BEFORE INSTALLATION
For safe operation of the valve, please observe the following:
CARE AND CLEANING
2
Your new shower is designed for years of trouble-free performance. Keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly with
warm water and drying with a clean, soft cloth. Do not use abrasive cleaners,
steel wool or harsh chemicals, as thes will dull the finish. Failure to follow these
instructions may void your warranty.
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
Observe all local plumbing codes.
Make sure the water supply is shut off at the stop valve.
Read these instructions carefully to ensure proper installation.
TOTO reserves the right to update product design without notice.
Minimum Pressure....................20 psi (138 kPa), dynamic
Maximum Pressure...................80 psi (551 kPa), static
Do not solder the connections directly to the valve as damage to the
internal components may occur.
Do not use this product at an ambient temperature below 32°F (0°C).
For products TBV01104U and TBV02104U, the water
flow will be small and the product can not be used
when the handle rod are in the three positions shown
in the figure.
Operating Pressure:
Thank you for Choosing TOTO!.......... 2
Care and Cleaning................................ 2
Warnings................................................ 2
Before Installation................................. 2
Tools you will need............................... 3
Included parts.................................... 3
Installation Procedure........................ 4
Warranty............................................... 7
Rough-in dimensions........................ 26
ENGLISH
Handle rod
3
TOOLS YOU WILL NEED
INCLUDED PARTS
Check to make sure you have the following parts indicated below:
ENGLISH
Handle
Screw
Set screw
Cap
Lining plate
Trim
Handle
Set screw
Cap
Lining plate
Trim
Handle
Set screw
Cap
Lining plate
Trim
Handle
Set screw
Cap
Lining plate
Trim
Screwdriver
Hacksaw
Silicon caulk
Hex wrench
(2.5mm)
TBV01101U / TBV02101U
TBV01102U / TBV02102U
TBV01103U / TBV02103U
TBV01104U / TBV02104U
