Sensor cord
(Connector: White)
Connector box
Groove:
Upper boundary
< With left supply hose/sensor wire outlet >
< With right supply hose/sensor wire outlet >
Remove the burr of the
cut portion with
snippers. (10 places)
*Be careful not to warp
the cover.
Top cover
Top cover
INSTALLATION PROCEDURE
3) Install the top cover
2. Fit the sensor connector into the
groove of the connector box to secure it.
3. Close the connector box.
NOTE
• When mounting the Top cover, make sure that the cord does not become tangled.
• Please take care when cutting so as not to damage the Top cover.
• Please be careful of the burrs to prevent injury due to sharp edges.
• Cut the first and last tabs on the side of the top cover (supply hose/sensor wire side)
and break firmly with band.
• Repeat for top portion of top cover for spout hose opening.
ENGLISH
17
