TOTAL Lubmarine Tech'Care, User Manual

Page: 8 / 24

Check that all items are present and have no visible damage.
Delivery includes:
Description
Tech’Care/Tcc kit: Rapid Optical Oil Tester for iron test only
9 volt 6LR61/PP3 battery (in battery compartment but not connected)
Magnetic sample preparation rack
Pack of 50 test tubes
100 μl Precision pipette
Pipetting level adjuster
6 x 5 ml syringes
Flask of solution IT1 (250 ml)
Flask of solvent IT2 (250 ml)
Flask of reagent IT3 (250 ml)
USB cable
Wipe felt pad
Part number
IT9111
DP9151
IT9102
IT9103
IT9103
IT9110
SER05
IT9200
IT9201
IT9202
DP6152
IT9105
6
4. Unpacking & inspection
5. Initial start-up
6. Battery
Upon delivery the battery of the Rapid Oil Test Gauge should be connected and the internal clock should be adjusted.
No other adjustment is required; the instrument is ready to be used.
The 9 volts 6LR6I/PP3 battery which powers your Rapid Oil Test Gauge should provide two years operation or more.
LUBMARINE
Test Conf Hist
RAPID OPTICAL
OIL TESTER
Rapid Optical Oil Tester
Product Overwiew
A battery power indicator is located in
the upper left corner of the
display screen.
When the battery power indicator
flashes, change the battery as
soon as possible.
Note:
When first powered on after the battery
has been replaced, the instrument
clock must be adjusted.
Installing the battery:
1 - Remove the battery cover
from the back of the Rapid Oil
Test Gauge.
2 - Insert the top of the
battery in the compartment
with terminals facing up,
observing proper polarity as
shown on the label .
3 - Firmly push the battery
upwards, then swing its
bottom fully inside the
compartment.
4 - Replace the cover.
Removing the battery:
1 - Remove the battery cover
from the back of the Rapid Oil
Test Gauge.
2 - Push the battery
downwards.
3 - Swing the top of
the battery out of the
compartment, then take it
fully out.
4 - Replace the cover.