TOTAL Lubmarine Tech'Care, User Manual, Page: 18 / 24

The Rapid Optical Oil Tester
counts down the time required
to complete the test.
(300 seconds)
When the test is complete,
the instrument beeps, shows
and logs the iron content of
the oil sample. If the alarm is
activated, the instrument
shows if the test result is
acceptable according to the
function settings.
Dispose of the vial and cap in an
appropriate waste container.
Do not use them for another test
as results may be biased.
Do not dispose of the residues in
the drainage system.
Carefully clean the tip of the
precision pipette.
21
22
16
Press the [Go] key.
20
GO
11° Turn vial upside down
10 times
12° Insert vial into tester
and press Go
Run Iron Test
Wait
until count down to 0
300
Run Iron Test
Ok
120 ppm
(comment)
Iron Content
Iron Test
With Rapid Optical Oil Tester