TOTAL Lubmarine Tech'Care, User Manual

Page: 10 / 24

The Rapid Oil Test Gauge has an internal clock which is used to time stamp test results when they are stored in the instrument memory.
To adjust the internal clock:
8
Press any of the 4 front panel keys to
switch the Rapid Optical Oil Tester on.
The instrument initializes and displays its
serial number and embedded software
version for a few seconds.
The instrument then displays the Main
Run Screen which offers three functions:
[Conf] , [Test] and [Hist]
5 - The year is displayed.
Press the [
▲
] key to increment the year.
Press the [
▼
] key to decrement the year.
Press [Next] when done.
1 - Press any of the 4 front panel keys to
turn the Rapid Optical Oil Tester on.
2 - Press the [Conf] key.
3 - Press the [Pwr Off] key.
Press the key corresponding to the
function you want to run:
Select [Conf] to adjust the internal clock,
the oil monitoring function and the power
off time of your instrument.
Select [Test] to run a water test or a BN
test (optional)
Select [Hist] to view the test history.
Refer to the appropriate section of this
manual for details on each function.
In order to preserve battery life the instru-
ment turns off automatically if not used for
a period of time. Refer to section 2 below
for instructions for setting power off time.
The user may also press the key for
2 seconds at any time to switch off the
Rapid Optical Oil Tester
Note: When first powered on after the
battery has been replaced, the instrument
accesses automatically the clock adjust-
ment function.
1 - Press any of the 4 front panel keys to
turn the Rapid Optical Oil Tester on.
2 - Press the [Conf] key.
3 - Press the [Time] key.
Note:
When first powered on after the battery has been replaced,
the instrument accesses automatically the clock adjustment function.
6 - Adjust the month and press [Next]
when done.
7 - Adjust the day and press [Next] when done.
8 - Adjust the hour and press [Next]
when done.
9 - Adjust the minutes and press [Save]
to store the data and return to the main
run screen.
At any time press briefly the key to
exit function and return to the Main Run
Screen. Modifications will not be saved.
The Rapid Optical Oil Tester shows the current Power Off time.
1 - Press the [
▲
] key to increase the value.
Press the [
▼
] key to decrease the value.
2 - Press [Save] when done
At any time press briefly the key to exit function and return
to the Main Run Screen. Modifications will not be saved.
Alarm Pwr Off Time
Config
Next
Year : 2019
Set Date
Save
Minute : 30
Set Time
Alarm Pwr Off Time
Config
Save
2 minute
Set Power Off
LUBMARINE
Test Conf Hist
RAPID OPTICAL
OIL TESTER
Rapid Optical Oil Tester
Operating the Rapid Optical Oil tester
3 Adjusting the internal clock
1 Power on / Main run screen / Power off
2 Adjusting power off time