background image

8

TOTAL GYM

®

 JUMP TRAINER

TM

 OWNER’S GUIDE |

 ASSEMBLY & INSTALLATION

ASSEMBL

Y & INST

ALL

STEP 2. 

Insert the Left Squat Strut on to 

the Left Rail by positioning the bottom 
of the Left Squat Strut in-between the 
Left Rail and Bungee Panel (as shown in 
close-up below). Gently wiggle the Strut all 
the way on to the Rail until the holes are 
aligned. Install the hardware (A, B, C, P) as 
shown. Do not tighten completely.

See close-up 

below

STEP 3.

 Repeat STEP 2 on other side, 

attaching the Right Squat Strut to the 
Right Rail using the hardware (A, B, C, P) 
as shown, but do not tighten completely.

See 

close-up 

below

Close-up

A

C

P

B

C

STEP 4.

 Install the hardware (G, F) on both 

rails as shown below.

G

F

F

G

DECIDE WHICH 

INSTALLATION SETTING  

IS APPROPRIATE FOR YOU: 

PHYSICAL THERAPY OR 

FITNESS. 

Next, attach Front Base to holes 1, 2 and 
3 as shown below using hardware (H,K,J) 
as indicated. Make sure to install the 
washer (K) on the bolt first (H). After all the 
bolts and nuts are installed, tighten them 
completely. Then cover each with a plastic 
cap (M).

J

H,K

Hole 4 plugged 

in Physical 

Therapy Setting

Hole 3

Hole 2

Hole 1

This is how the Front Base attached to 
the Struts should look for the PHYSICAL 
THERAPY Setting.

Hole 4 plugged 

in Physical 

Therapy Setting

TO CONTINUE PHYSICAL 

THERAPY ASSEMBLY  

SKIP TO STEP 8.

A

C

P

B

C

Insure the Strut is  

above the Bungee Panel  

highlighted in blue.

Close-up

STEP 5. PHYSICAL THERAPY ASSEMBLY 

FOR FITNESS ASSEMBLY SKIP TO STEP 6.

 

Using hardware (R), as indicated, first 
insert plastic plugs into hole 4 on the 
inside and outside of each Strut (as shown 
below).

These holes 

come already 

plugged - do 

not remove

Hole 4

PHYSICAL THERAPY 

ASSEMBLY

Summary of Contents for JUMP TRAINER

















Reviews: