Tosot TW09HQ2C2A, Owner'S Manual

Page: 19 / 44

1 4
SLEEP button
TEMP button
7
8
Introduction for buttons on remote controller
▲
▲
Under COOL or HEAT mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
function and " " icon will disappear.
By pressing this button, you can see indoor set temperature, indoor ambient temp-
erature or outdoor ambient temperature on indoor unit’s display. The setting on
remote controlleris selected circularly as below:
no display
TURBO button
5
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
▲
▲/ button
6
● Press "▲" or " " button once increase or decrease set temperature 1
℃
(1°F).
Holding "▲" or " " button, 2s late r, set temperature on remote controller will
change quickly . On releasing button after setting is finished, temperature indica-
tor on indoor unit will change accordingly. (Temperature can’t be adjusted under
auto mode)
● When setting TIMER ON, TIMER OFF o r CLOCK, press "▲" or " " button to
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons) When setting
TIMER ON, TIMER OFF or CLOCK, press "▲ " or " " button to adjust time. (Refer
to CLOCK, TIMER ON, TIMER OFF buttons)
▲
▲
● When selecting " ", air conditioner is blowing fan automatically . Horizontal
louver will automatically swing up & down at maximum angle.
● When selecting "
、 、 、 、
● When selecting "
、 、
● Hold " " button above 2s to set your required swing angle. When reaching your
required angle, release the button.
Note:
"
、 、
" may not be available. When air conditioner receives this signal, the
air conditioner will blow fan automatically.