Tosot TW09HQ2C2A, Owner'S Manual

Page: 22 / 44

1 7
Child lock function
Press "▲" and " " simultaneously to turn on or turn o f f child lock function. When
child lock function is on, " " icon is displayed on remote controlle r . If you operate
the remote controlle r , the " " icon will blink three times without sending signal to
the unit.
▲
8
℃
heating function
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start
heating function. When this function is started up, " " and "8
℃
"
will be shown on remote controlle r , and the air conditioner keep the heating status
. Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8
℃
up or turn o f f 8
℃
at 8
℃
heating function.
Note:
● Under 8
℃
heating function, fan speed i s defaulted at auto speed and it can’t be
adjusted.
● Under 8
℃
heating function, set temperature can’t be adjusted. Press " TURBO "
button and the remote controller won’t s end signal.
● Sleep function and 8
℃
heating function can’t operate at the same time. If 8
℃
heating function has been set under c ooling mode, press sleep button will cancel
8
℃
heating function. If sleep function has been set under cooling mode, start up
the 8
℃
heating function will cancel sle e p function.
● Under
℉
temperature display, the remote controller will display 46
℉
heating.
Function introduction for combination buttons
Temperature display switchover function
Under OFF status, press " " and "MODE" buttons simultaneously to switch temp-
erature display between
℃
and
℉
.
▲
I FEEL Function
Press "▲" and "MODE" buttons simultaneously to start I FEEL function and " "
will be displayed on the remote controller. After this function is set, the remote
controller will send the detected ambient temperature to the controller and the unit
will automatically adjust the indoor tempe r ature according to the dete c ted tempera-
ture. Press this two buttons simultaneously again to close I FEEL function and " "
will disappear.
● Please put the remote controller near user when this function is set. Do not put
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.When I FEEL function
is turned on, the remote controller should be put within the area where indoor
unit can receive the signal sent by the remote controller.
● Sleep function and energy-saving function can’t operate at the same time. If
energy-saving function has been set under cooling mode, press sleep button will
cancel energy-saving function. If sleep function has been set under cooling
mode, start up the energy-saving function will cancel sleep function.