Tosot TW09HQ2C2A, Owner'S Manual

Page: 18 / 44

1 3
Introduction for buttons on remote controller
FAN button
SWING button
3
4
Press this button can select up&down swing angle. Fan blow angle can be selected
circularly as below:
Press "▲" or " " button to adjust set temperature. Press " F AN" button to adjust
fan speed. Press "SWING" button to adjust fan blowing angle. (Cooling only unit
won’t receive heating mode signal. If setting heat mode with remote controlle r,
press ON/OFF button can’t start up the unit).
Note:
● For preventing cold ai r , after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30
℃
(61~86°F) ; Fan speed:
auto, low speed, medium speed, high speed.
This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
Having set X-FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for a few minutes. at low speed. In this
period, Hold fan speed button for 2s to stop indoor fan directly.
Having set X-FAN function off: After turning off the unit by pressing ON/OFF
button, the complete unit will be o ff directly.
X-FAN function Hold fan speed button for 2s in C OOL or DRY mode , the icon “ ” is
displayed and the indoor fan will continue operation for a few min utes in order to dry
the indoor unit even though you have turned off the unit. After energization, X-FAN
OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
●
●
●
Note:
● Under AUTO speed, air conditioner will select proper fan speed automatically
according to ex-factory setting.
● Fan speed under dry mode is low spee d.
Pressing this button can set fan speed circularly as: auto ( AUTO), low( ) , medium
( ), high( ).
Auto
no display
(horizontal louvers stops
at current position)
▲