8
℃
heating function
Energy-saving function
Function introduction for
combination buttons
●
●
●
●
Notice
Notice
●
Under energy-saving function, fan speed is defaulted
at auto speed and it can
'
t be adjusted.
●
Under energy-saving function, set temperature can
'
t
be adjusted. Press "TURBO" button and the remote
Under heat mode, press "TEMP" and "CLOCK"
buttons simultaneously to start up or turn off 8
℃
heating function. When this function is started up,
" " and "8
℃
" will be shown on remote controller,
and the air conditioner keep the heating status at
8
℃
. Press "TEMP" and "CLOCK" buttons simulta-
neously again to exit 8
℃
heating function.
controller won
'
t send signal.
●
Sleep function and energy-saving function can
'
t oper-
10
ate at the same time. If energy-saving function has
been set under cool mode, press sleep button will
cancel energy-saving function. If sleep function has
been set under cool mode, start up the energy-saving
function will cancel sleep function.
LIGHT
TEMP
Press this button to turn off display light on indoor
unit. " " icon on remote controller disappears.
Press this button again to turn on display light.
" " icon is displayed.
Under cooling mode, press "TEMP" and "CLOCK"
buttons simultaneously to start up or turn off ener-
gy-saving function. When energy-saving function
is started up, "SE" will be shown on remote con-
troller, and air conditioner will adjust the set tem-
perature automatically according to ex-factory
setting to reach to the best energy-saving effect.
Press "TEMP" and "CLOCK" buttons simultane-
ously again to exit energy-saving function.
Under 8
℃
heating function, fan speed is defaulted at
auto speed and it can
'
t be adjusted.
Under 8
℃
heating function, set temperature can
'
t be
adjusted. Press "TURBO" button and the remote
controller won
'
t send signal.
Sleep function and 8
℃
heating function can
'
t operate
at the same time. If 8
℃
heating function has been set
under heat mode, press sleep button will cancel 8
℃
heating function. If sleep function has been set under
heat mode, start up the 8
℃
heating function will
cancel sleep function.
Under
℉
temperature display, the remote controller
will display 46
℉
heating.
Press this button to achieve the on and off of
health and scavenging functions in operation st-
ation. Press this button for the first time to start
scavenging function; LCD displays " ". Press
the button for the second time to start health and
scavenging functions simultaneously; LCD displ-
ays " " and " ". Press this button for the third
time to quit health and scavenging functions simu-
ltaneously. Press the button for the fourth time to
start health function; LCD display " ". Press
this button again to repeat the operation above.
This function is applicable to partial of models.
Press this button, you can see indoor set tempera-
ture, indoor ambient temperature on indoor unit' s
display. The setting on remote controller is select-
ed circularly as below:
no display
Child lock function
Temperature display switchover function
Under OFF status, press "
▼
" and "MODE" buttons
simultaneously to switch temperature display
between
℃
and
℉
.
Press "
▲
" and "
▼
" simultaneously to turn on or
turn off child lock function. When child lock func-
tion is on, " " icon is displayed on remote control-
ler. If you operate the remote controller, the " "
icon will blink three times without sending signal to
the unit.
