TOSINGRAF DPG330M, Owner'S Manual

Page: 38 / 41

34 RE V. 2.0- 06/20
f
oiling
To carry out the foiling process please refer to the specific version of this machine equipped with a rewinding device, used for the recovery
of waste material:
1) turn on the machine
2) set the roller temperature above 120 ° C (the temperature depends on the operating speed, the type of work and the quality of the
foil used);
3) load the foil following the instructions as in image 6.14, and pass the foil through the rollers making it come out after the dragging
ones and rewinding it in the appropriate rewinding shaft located on the top of the machine.
Image 6.14 Image 6.15
6.4 MACHINE DESCRIPTION
The machine is intended for use by only one operator at a time, who must have received adequate information and training.
6.4.1 u
ses not exPeCted
Unintended uses are all uses not expressly mentioned, and in particular stands out:
• Any use other than that for which the machine has been built is an abnormal condition and can cause damage to the machine
structure
• The use without the safety devices provided
• Failure to follow the procedures in this manual
• The use of the machine in the environment at risk of fire and explosion as it is not equipped with explosion-proof components
Ch a P t ER 6: usE