Toshko M5000 User Manual Download

Page: 82 / 119

DIGITAL VIDEO RECORDER

(3) Multiscreen Display

Click the individual Multiscreen buttons

to display corresponding multiscreen.

(4) Change the camera position.

Click on each camera to directly switch the desired camera.

(5) Full Screen Display

There are 2 way of Full Screen display.

1) Select any camera for Full Screen display by double clicking the window of desired

camera. (To come back to previous Live viewing mode, please double click again.)

2) Select any camera for Full Screen display by clicking Right Mouse button.

(6)

Dual Display

(Simultaneous Playback with Live Viewing)

Individual channels can be selected and begin remote playback while the rest of the

channels are in live monitoring mode. Dual display is available for both individual DVRs and

Virtual DVRs.

1) Select any camera for playback during live monitoring. Context Menu will appear on

screen by Right- clicking.

Context Menu

Summary of Contents for M5000
























































































































Search results

Summary of Contents for M5000

Reviews:

Related manuals for M5000

Brands by name

Popular brands

Toshko M5000, User Manual

Search results

Summary of Contents for M5000

Reviews:

Related manuals for M5000

Brands by name

Popular brands