39
DIGITAL VIDEO RECORDER
Network Setup
The static service consists of an IP address that remains constant for the duration of the
contract of the internet service, whereas the dynamic service consists of an IP address that
frequently changes every time a new connection is made through the provided modem, or
recurrently in a given period of time. Though most internet service providers offer both
solutions, this manual will distinguish the two solutions according to the commonly available
service type to configure the DVR for the networking purposes.
1. GENERAL
1
.
Us
e Direction buttons [
] to select “NETWORK” menu. Then, press [ENTER] button to
display “Network”.
2
.
Use Down button [ ] to specify the detail.
3
.
Use [-, +] button to change the value.
4
.
Save changes and exit the menu, press [ENTER] button.
Exit the menu without making changes, press [CANCEL] button.
ITEM
ADJUSTMENT
CONFIG
y
STATIC IP: Edit IP address, Gateway and Netmask.
y
DHCP: Dynamic Host Configuration Protocol. It is automatically set on
from Local DHCP if there is Local DHCP server. It will not be selected if the
DVR is not connected WAN.
The host name will be unique to the DVR, and will be displayed something
similar to M10020E.
IP SETUP
y
Edit “IP ADDRESS, GATEWAY, NETMASK”
PORT
y
Select “0000 ~ 9999”
The DVR’s connection port can be adjusted in case the default port 7000
is blocked. The DVR’s service port may be modified to allow the
connection from CMS.
BANDWIDTH
y
Unlimited is set by default. Select “64 KBPS~ 8MBPS”