22
DIGITAL VIDEO RECORDER
Zooming
During live view mode or playback, it is possible to zoom into a section of the screen to get a
close-up view of the screen.
1. To activate the digital zoom, select the full screen display of the camera you wish to
zoom.
2. Then press the
[ZOOM]
button. Zoom area box pops up, as shown below.
3. Move the box to the desired position using Direction [
] buttons.
4. Press [+] button to enlarge the image. Press [ - ] button to zoom out the image.
5. Press [CANCEL] button to return normal mode.
<Note>
If the Zoom button is pressed while in a multiscreen display, zoom operation is not
activated.
Spot Monitor
In addition to the Main Monitor, attaching a Spot Monitor enables user to monitor specific
channels independently form the main monitor
y
Press
[Spot]
button on the remote controller or Shuttle hold button on front, then press
number button you wish watch as full screen.
y
Press
[Spot]
button twice to auto switch cameras. Sequence interval can be set from the
Sequential Setup.
y
When an alarm has been triggered, that specific channel will go into Full Screen.
x 2
x 8
