51
DIGITAL VIDEO RECORDER
Log List Search/ Alarm, Motion Search
The logs can be used to search and review directly to a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly
from the time of the incident.
１
.
To start Event Search, press
[Log]
button, then Log List Menu pops up, as
shown below.
MENU TAP
CONDITION
ALL
y
It has a list of all the events since the initial power on procedure of DVR
SYSTEM
y
It shows All Event except for Alarm, Motion, and Video Loss.
ALARM
y
It shows All Alarm List.
MOTION
y
It shows Motion List.
VIDEO LOSS
y
It shows Video Loss List.
2. Use Up/Down buttons [
TS
] to desired “Time” to playback. Use Left/Right buttons
[
WX
] to move NEXT page.
3. Press
[ENTER]
button to start playback.
<Note>
Log list is saved on HDD.
<Note>
To save log output, please connect USB memory stick into USB port on Front or
Rear. Then press Menu button on each category to backup Log data
