Toshko M5000 User Manual Download

Page: 104 / 119

103

DIGITAL VIDEO RECORDER

2) Any selected camera on DVR.

Click any DVR on DVR Window while Virtual DVR is activating.

①

After camera Icons diplyed,

②

any camera on DVR to directly drag the desired channel.

In the following exampels, Camera No 1 on 3

DVR is draged to Channel No 14.

①

(5) Delete Camera.

There are two ways of deleteing the camera from CMS.

1) Select any camera for delete during live monitoring. Context Menu will appear on screen

by Right clicking. Select “ REMOVE”

2) Select any camera to delete and directly drag to DVR Window or Virtual DVR Window.

4. Live Viewing on Virtual DVR

It is exactly same as Actual DVR.

②

③

< Note >

In the case of overlapping

on same channel, New Camera will replace existing camera.

Summary of Contents for M5000
























































































































Search results

Summary of Contents for M5000

Reviews:

Related manuals for M5000

Brands by name

Popular brands

Toshko M5000, User Manual

Search results

Summary of Contents for M5000

Reviews:

Related manuals for M5000

Brands by name

Popular brands