Toshiba ZL2* Series User Manual Download Page 70

Page: 70 / 106

CONTROLS AND FEATURES

glis

Selecting the Playback Mode

You can view 3D photos in 3D and you can also view 2D
photos in 3D.

Select the playback mode from the Quick Menu or switch
playback modes using the

button on the remote control.

The current

Playback Mode

is displayed at the top left of the

list mode.

To select the playback mode from the Quick Menu

Press

QUICK

to open the

Quick Menu

in Multi View

mode.

Press

to select

Playback Mode

and press

to select

2D Mode

3D Mode

3D Mode 2

2D Mode

All photos are displayed in 2D.

3D Mode 1

3D photos are displayed in 3D and 2D photos in 2D.

3D Mode 2

All photos are displayed in 3D.
2D photos are converted and displayed in 3D, and 3D
photos are displayed in 3D.

To switch playback modes using the remote control

Press

while in

Single View

mode.

The mode switches between

2D Mode

3D Mode 1

and

3D Mode 2

each time

is pressed.

To display the device information

Press

QUICK

to open the

Quick Menu

from Multi

View mode.

Press

to select

Device Information

and press

NOTE:

When the photos on the USB device are used, or the TV

is used as a DMR, this feature is not available.

To close the Photo Viewer

Press

EXIT

. The television will return to the last viewed

channel or external input.

File Compatibility

See page 103.

You can select movies from a list of available files.

Press

to select a file or folder.

buttons

can be used to page up/down the movie list when
there are more files than will fit onto one screen.

When you select a folder, press

to move to the

next layer. Press

BACK

to move back to the previous

layer.

With the desired file selected, press

(play) to

start playback.

NOTE:

• On preview screen, if you highlight the file without

pressing

, the content is played on a preview

screen. When

is pressed, it is played in full screen

mode.

• Depending on the file size, it may take some time to

start playback.

Press

to stop playback.

NOTE:

• If playback finishes before

is pressed, the screen will

return to the list.

• Depending on the file size, it may take some time for

playback to begin.

Viewing movie files (on a DLNA

CERTIFIED™ Server or USB device)

Movie list example

/Folder

Sort : File Name

1/9

Page

QUICK Features

Play

movie

MOVIE

Unprotected

WWWWWWWWWWWWW.mp4

00:00:20 / 00:04:00

Summary of Contents for ZL2* Series











































































































Search results

Summary of Contents for ZL2* Series

Reviews:

Related manuals for ZL2* Series

Brands by name

Popular brands

Toshiba ZL2* Series, User Manual

Search results

Summary of Contents for ZL2* Series

Reviews:

Related manuals for ZL2* Series

Brands by name

Popular brands