Toshiba ZL2* Series User Manual Download Page 59

Page: 59 / 106

CONTROLS AND FEATURES

Engl

ish

Press

to select a day tab or

Personal Mode

tab.

NOTE:

If no titles have been registered to

Personal

Mode

Personal Grouping

will be grayed out.

Press

Viewing starts.

●

icon appears next to the title currently being

recorded.
When the title currently being recorded is selected
and

is pressed, playback will start from the

beginning of the programme currently being
recorded.

Operations during viewing

The following operations can be performed using the remote
control buttons.

To PLAY

To SKIP-BACK

To STOP

To REWIND

To PAUSE/STEP

To FAST FORWARD

To start Time Shift

To SKIP-FORWARD

Recording

As well as viewing the list of recorded titles on the

Library

screen,

you can protect or delete titles and register titles to Personal

Mode.

To display the Library screen

Press

MENU

to highlight

Programmed

Programme Timers

icons and press

Press

to select

Library

and press

. The

Library

screen will appear.

To protect or unprotect a recorded programme

Protecting a programme prevents it from being accidentally
deleted.
Select the title of the programme you want to protect and
press the

GREEN

button. icon appears next to the title and

the programme is protected.
If Protect is set to

when the programme is recorded,

icon appears next to the title of the recorded programme.

When a title with icon is selected and the

GREEN

button is

pressed, icon disappears and the programme is
unprotected.

To delete a recorded programme

Press the

RED

button. Check boxes will appear next to

the titles.

Press

to select the title you want to delete and

press

. A check mark will be inserted in the check

box.

To insert a check mark against all the titles, press the

GREEN

button.

To uncheck all the check boxes, press the

BLUE

button.

NOTE:

• A check mark will not be inserted against protected

titles.

• Note that once deleted, a title cannot be restored.

Press the

RED

button.

Select

Yes

in the confirmation window and press

All the titles with check marks will be deleted.

Operations from the Library screen

Sort : New

Sun

Mon

Tue

Thu

Fri

Sat

Wed

WWWWWW

WWWWWWWWWWWW

WWWWW

14:15 Wed, 16 Feb

WWWWWWW

Library

Weekly

1235 ITV London

ASTRA 19.2°E

USB HDD3
Remaining Capacity:
86% (912.0GB)

10 July 2011 14:30(01:30)

Wed, 16 Feb 10:00

Thu, 17 Feb 10:00

Fri, 18 Feb 10:00

Sat, 18 Feb 10:00

Sun, 18 Feb 10:00

Mon, 18 Feb 10:00

Sort : New

Sun

Mon

Tue

WWWWWW

WWWWWWWWWWWW

WWWWW

WWWWWWW

Library

Weekly

Summary of Contents for ZL2* Series











































































































Search results

Summary of Contents for ZL2* Series

Reviews:

Related manuals for ZL2* Series

Brands by name

Popular brands

Toshiba ZL2* Series, User Manual

Search results

Summary of Contents for ZL2* Series

Reviews:

Related manuals for ZL2* Series

Brands by name

Popular brands