9
E
n
g
lish
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables:
. . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
Satellite cable:
. . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the
SATELLITE
ANTENNA
socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads:
. . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder
IN
/
OUT
socket to the television.
Connect the decoder
TV
socket to the television.
Use the SCART Adaptor cable (supplied).
Before running
Auto Tuning
, put your decoder and media
recorder to
Standby
.
*COMPONENT VIDEO INPUT
connection:
Use the COMPONENT Adaptor cable (supplied).
The AUDIO terminals are shared with the
VIDEO INPUT
.
**VIDEO INPUT
connection:
Use the A/V Adaptor cable or SCART-AV Adaptor cable
(supplied).
The AUDIO terminals are shared with the
COMPONENT
INPUT
.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: this output is always
active.
HDMI
®
(High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 85.
LAN
port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owner
’s
manuals for
all
additional equipment must be
referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press
o
to select between
DTV
,
EXT 1
,
EXT 2
,
EXT 3
,
HDMI 1
,
HDMI 2
,
HDMI 3
,
HDMI 4
,
PC
or
ATV
.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
VIDEO INPUT**
COMPONENT VIDEO INPUT*
HDMI
®
INPUT SOCKETS
media recorder
POWER switch
Satellite dish
LAN port
OPTICAL DIGITAL AUDIO OUTPUT
Aerial/Cable
SCART Adaptor cable
(supplied)
PC/HDMI2 AUDIO (shared)
FIXING STRAP
POWER cord
"F-type"
