background image

42

CONTROLS AND FEATURES

En

glish

Using your home network

This TV is a DLNA CERTIFIED™ Player and Renderer. 
This TV can play digital content stored on a DLNA 
CERTIFIED™ product with server function.
If you want to use this TV as a DLNA CERTIFIED™ 
Player or Renderer, you will have to configure the 
network on your TV (

see page 14

).

If you want to use your home network, you will have 
to configure the network on your TV. (

see page 14

)

Change the network settings if necessary (see 
‘Setting up the Network’ on page 43).

When using a wireless home network:

CAUTION

Bluetooth™ and Wireless LAN devices operate within 
the same radio frequency range and may interfere 
with one another. If you use Bluetooth™ and Wireless 
LAN devices simultaneously, you may occasionally 
experience a less than optimal network performance 
or even lose your network connection.
If you should experience any such problem, 
immediately turn off either your Bluetooth™ or 
Wireless LAN device.
Actual performance can vary, including lower wireless 
network capacity, data throughput rate, range and 
coverage.
Performance depends on many factors, conditions and 
variables, including distance from the access point, 
volume of network traffic, building materials and 
construction, operating system used, mix of wireless 
products used, interference and other adverse 
conditions.

Wireless LAN and your Health

Wireless LAN products, like other radio devices, emit radio 
frequency electromagnetic energy. The level of energy emitted 
by Wireless LAN devices, however, is far less than the 
electromagnetic energy emitted by wireless devices such as 
mobile phones.
Because Wireless LAN products operate within the guidelines 
found in radio frequency safety standards and 
recommendations, TOSHIBA believes Wireless LAN is safe for 
use by consumers. These standards and recommendations 
reflect the consensus of the scientific community and result from 
deliberations of panels and committees of scientists who 
continually review and interpret the extensive research literature.
In some situations or environments, the use of Wireless LAN 
may be restricted by the proprietor of the building or 
responsible representatives of the organization. Such 
restrictions may apply in environments where the risk of 
interference to other devices or services is perceived or 
identified as harmful.
If you are uncertain of the policy that applies to the use of 
wireless devices in a specific organization or environment, you 
are encouraged to ask for authorization to use the Wireless 
LAN device prior to turning on the equipment.

When using the TV under wireless LAN environment:

• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on 

5 GHz for audio and SD video streaming.

• It is recommended to use IEEE 802.11n on 5 GHz for HD 

video streaming.

• It is recommended that the encoding rate for streaming 

video content is 20 Mbps or less.

• It is not recommended to use 2.4 GHz for audio and video 

streaming.

• Content playback may be interrupted by various surrounding 

interference.

Europe Statement

This USB WLAN Adaptor (built-in) may be operated in below 
country:

• If this device is going to be operated in the frequency range 

of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.

• If this device is going to be operated for 802.11 b/g/n   

function in the frequency range of 2.454 GHz to 2.4835 GHz 
in France, it is restricted to indoor use.

• A general authorization is required for using this device   

outdoors or in public places in Italy.

• This device is NOT ALLOWED to be used in the geographical 

area within a radius of 20km from the centre of Ny-Alesund 
in Norway.

Ukraine Statement

Contains approved USB WLAN Adaptor, 
model name: WLU5040 (ROHS), approved by CB 
“UkrCERTRADIO”.

AT

Austria

IS

Iceland

BE

Belgium

LI

Liechtenstein

CH

Switzerland

LT

Lithuania

CY

Cyprus

LU

Luxembourg

CZ

Czech Republic

LV

Latvia

DE

Germany

MT

Malta

DK

Denmark

NL

Netherlands

ES

Spain

NO

Norway

FI

Finland

PL

Poland

FR

France

PT

Portugal

GB

United Kingdom

SE

Sweden

GR

Greece

SI

Slovenia

EE

Estonia

SK

Slovakia

HU

Hungary

BG

Bulgaria

IT

Italy

RO

Romania

IE

Ireland

TR

Turkey

Summary of Contents for WL76 Digital Series

























































































Reviews: