17
SETTING UP YOUR TV
E
n
g
lish
You must allow the television to complete the search.
When the search is complete, the television will
automatically select position one.
The
Auto Tuning
screen will display the total number
of services found.
l
Press
C
or
c
to view the
DTV
(digital channel) or
ATV
(analogue channel) lists.
m
Use
B
or
b
to move through the list to select a
channel, and then press
OK
to view.
In
ATV
mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning
.
REMEMBER:
Press
TV
at any time to select between
ATV
and
DTV
(DTV Ant TV/RADIO/TEXT, DTV Cable
TV/RADIO/TEXT, DTV Sat TV/RADIO/TEXT if available)
modes.
NOTE:
The time will be set automatically by
transmission but can be advanced or decreased by
using
Local Time Setting
in the
DTV Settings
screen.
Select
Next
and press
OK
. The
Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” section on page 18.
Highlight
Done
and press
OK
.
If your satellite dish is movable, the following
Positioning
screen will appear.
Press
B
or
b
to highlight
Positioning
, and then press
C
or
c
to find the dish position with the strongest
signal level.
Press
B
or
b
to highlight
Store Position
and press
OK
to store the dish position. Repeat steps 14 and 15
for the next satellite as needed.
If your satellite dish is not movable, the
Positioning
screen will not appear.
Adjust the dish position manually for maximum Signal
Level strength.
Highlight
Done
and press
OK
.
If the reception testing completes successfully, the
Auto Tuning
startup screen will display.
You can select
Scan Option
from
Free to Air
and
All
.
Press
B
or
b
to highlight
Start Scan
, and then press
OK
.
The television will start to search for available
DVB-S
channels. The progress bar will indicate the scan
status.
When the search is complete, the
Auto Tuning
results
screen will display the total number of services found.
Use
B
or
b
to move through the list to select a
channel, and then press
OK
to view.
Auto Tuning
Progress
Found
ATV Tune
Waiting...
Channel: C7
DTV Tune
3%
2
Satellite
No.
Dish
LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
1
1
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type
None
LNB Power
On
Done
PLEASE NOTE
The
Quick Setup
menu can also be accessed at any
time from the
SETUP
menu.
Positioning
Signal Level
Go to Stored Position
Store Position
Transponder
1/83 (10743 MHz H)
Positioning
W
E
Go to 0
Satellite : ASTRA 19.2°E
Step Size
1
Auto Tuning - Satellite
Start Scan
Satellite
Free to Air
ASTRA(19.2°E)
Scan Option
