76
CONTROLS AND FEATURES
En
glish
NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the popup
window, some REGZA-LINK devices may automatically turn
on.
• When the television is switched on it will take a few minutes
for the REGZA-LINK icon to appear in the list. When an
HDMI cable is removed, it will take a few minutes for the icon
to disappear.
• If the HDMI cable from connected equipment is changed,
Enable REGZA-LINK
in the REGZA-LINK Setup menu may
need to be reset to
On
.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the
Enable REGZA-
LINK
item on the REGZA-LINK Setup menu from
Off
to
On
.
With the REGZA-LINK mode on your television’s remote
control, you can control the connected REGZA-LINK playback
device you are watching.
To control the REGZA-LINK input source first select the
equipment by REGZA-LINK input source selection.
See page 8 for details on available remote control key
functions.
NOTE:
The available functions depend on the equipment
connected. All of the remote control keys may not be available.
Please refer to the operation manual for each piece of
equipment connected.
When connected equipment is switched on, REGZA-LINK will
automatically detect the television through the input selection.
If the television is in standby, it will be switched on
automatically.
These functions can be enabled or disabled from the REGZA-
LINK Setup (see page 75).
NOTE:
• Even if the equipment is showing a menu, the television may
automatically show the input source.
• This feature depends on the connected equipment and
television state.
If the television is turned off (standby mode), the television will
send a message to turn off (standby mode) all of the REGZA-
LINK devices connected to the television.
These functions can be enabled or disabled from the REGZA-
LINK Setup (see page 75).
NOTE:
This feature depends on the connected equipment and
television state.
With your television’s remote control, you can adjust or mute the
sound volume of the speakers connected to the television via an
AV amplifier. First, set the remote control mode switch to
REGZA-LINK.
a
Set the
Speaker Preference
to
Amplifier
in the
REGZA-LINK Setup
menu.
b
Confirm that a connected REGZA-LINK device (such as
a DVD player, etc) is selected for the AV amplifier input
source.
NOTE:
• These functions depend on the device connected.
• When you turn on the AV amplifier, change its input source,
or adjust the sound volume, the sound will be output from
the AV amplifier’s speakers even if
TV Speakers
has been
selected. Turn the television off and on again to output the
sound from the TV Speakers.
• This feature may not work if the AV amplifier is operated.
This feature automatically adjusts the suitable widescreen
formats and picture preferences when connected to a Toshiba
PC compatible with REGZA-LINK.
NOTE:
This feature depends on the connected equipment
state.
REGZA-LINK playback device control
Available remote control keys (behind the panel)
REGZA-LINK one touch play
REGZA-LINK system standby
REGZA-LINK system audio control
Toshiba PC compatible with REGZA-LINK
