Toshiba WIRELESS LAN MODULE GN-1050, Operator'S Manual

Page: 31 / 60

1.SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 29
1 SETTING UP WIRELESS NETWORK
5
Specify the following items and press the [NEXT].
y FULL AGREEMENT of SERVER NAME
Select the [ON] to confirm whether the RADIUS server name in the server certification file and the input RADIUS
server name is same or not. When the [ON] button is selected, press the [RADIUS SERVER NAME] to enter the
RADIUS server name.
In the RADIUS SERVER NAME, enter the user name in “Server Name@FQDN” format.
Example: wlanserver@toshiba.com
y ENCRYPTION INTENSITY
Select the encryption intensity. When the PEAP protocol is selected, only [LOW] can be selected.
6
Specify the following items and press the [NEXT].
y ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the communication between Access Point and this equipment.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message
integrity check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that
the U.S. government improves to replace the DES and 3DES.
When WPA or WPA2 is selected for the security mode, only [TKIP] or [AES(CCMP)] can be selected.
The encryption intensity between each encryption is:
AES(CCMP) > TKIP