30
How to clean the floor head
It will be hard for the floor head to revolve when twined up by rubbish.
Please remove the rubbish attached on the two tips of the rotation part.
The floor head can be washed with water.
1
Disassemble the rotating part and its cover.
The cover of
the rotating part
Rotating part
The protruding part
Groove
①
②
③
①
Insert coin and the like into the groove of the
rotating part's cover and revolve to the mark
"
ひらく
" (meaning "open").
②
Extract the protruding part.
③
Disassemble the rotating part.
2
Remove the rubbish.
Cut off the rubbish attached to the rotating part
with scissors.
Use dry cloth to soak up the moist of the floor head after
cleaning. And make sure the floor head is totally dry before
assembling them.
3
Assemble the rotating part and its cover.
①
Assemble the white tip of the rotating part in the direction of the arrow.
②
Infix the hook into the sunken part and assemble the cover of the rotating part to the protruding
part in the direction of the arrow.
③
Insert the coin or other objects into the groove and revolve to the mark "
しまる
" (meaning "off").
The white tip of
the rotating part
The sunken
part
Rotating part
Hook
①
②
③
①
141114c1_VC-GC33BSA.indb 30
2014/11/14 16:00:56
