26
2. How to clean the pleat filter
①
Turn the cup cover to the mark "
" in the direction of the arrow to remove it.
Cup cover
②
Slide the dust cleaning slider right and left for about 5 times.
③
Press the button on both sides of the pleat filter to disassemble it.
④
Remove the dust attached on the pleat filter using the cleaning brush and then empty the separation
net.
*The pleat filter could be cleaned after cleaning the dust cup.
*Do not press the cup button when emptying the separation net to avoid dropping.
*When emptying any vacuum cleaner it is difficult to avoid exposure to dust. To minimize this risk, please
ensure that you encase the dust cup in a large bag to empty it and close the bag as tightly as possible round the
dust cup. Remove the dust cup and close the bag as tightly and quickly as possible and dispose of this
immediately. It is advisable to wear disposable gloves and a face mask while emptying the cleaner. If at all
possible, ask a non allergy sufferer to empty the dust cup when required.
Dust cleaning slider
Button
Button
141114c1_VC-GC33BSA.indb 26
2014/11/14 16:00:53
