22
How to use floor head
■
Front suction inlet
Front suction inlet can suck up the dust and rubbish attached on the floor or slot.
■
Rotating part
Put the floor head on the ground and the rotating part will start working.
●
Rotating part may stop working while the dust in the cup is too much or separation
net and pleat filter is blocked. Please empty the dust and clean the separation net
and pleat filter.
Warning
●
Keep all parts of body away from the rotating part of the floor head to
avoid injury.
Clean of the carpet
Please clean the carpet with the
pattern. When the suction power is too
strong to clean, please turn to
pattern.
●
Lots of fiber will attach
to the dust cup when
cleaning new carpet, but
this phenomenon will
reduce slowly during the
u s e o f t h e v a c u u m
cleaner.
Clean of the floor
To increase the cleaning effect and avoid scratching the floor
surface, move the floor head lightly along the floor.
Clean of the places under the sofa and bed
Tilt and rotate the handgrip as needed to clean the places under
the sofa and bed.
Clean of the narrow places
Changing the direction of the floor head by rotating the handgrip
to clean the narrow places such as corner.
Front suction inlet
Rotating part
Wheel
141114c1_VC-GC33BSA.indb 22
2014/11/14 16:00:49
