1
2
3
4
5
6
RECORDING
System Recording
continued
66
Modifying Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before
you press MENU a second time to confirm.
VIDEO
If you wish to...
Then...
Select an input source other
♦
Press the
➛
or
❿
button, until the PR selection flashes.
than the tuner (AV1, AV2 or AUX)
♦
Press I.SELECT button one or more times to change the input
source selection.
Result :
The programme number is replaced by :
•
A1, A2 or AU for a satellite tuner or external
video input (used by another VTR for example)
•
S - - - for the satellite input (used by a
satellite receiver for example) see page 22
Note : The input source must be selected before changing
any other value.
Record a programme every day
♦
Press the
➛
or
❿
button, until the DAY selection flashes.
(Monday to Sunday) at the same time
♦
Press the
$
or
❷
button, until the DLY (Daily) value is
displayed.
Record a programme every week
♦
Press the
➛
or
❿
button, until the DAY selection flashes.
on the same day and at the same time
♦
Press the
$
or
❷
button, until the W- (Week) value is
displayed. followed by the required day.
Example : W - SA (Weekly Saturday)
Extend the recording time
♦
Press the
➛
or
❿
button, until the STOP selection flashes.
♦
Press the
$
or
❷
button to increase or decrease the stop
time.
Select the recording speed
♦
Press the
➛
or
❿
button, recording speed selection flashes.
♦
Press the
$
or
❷
button until the correct indication is
displayed :
•
AUTO (Auto Tape Speed Select) : see page 40
•
SP (Standard Play)
•
LP (Long Play)
Select VPS/PDC
♦
Press the
➛
or
❿
button, until the V/P selection flashes.
♦
Press the
$
or
❷
button, until the ON or “-” indication
is displayed.
Note : Do not select VPS/PDC unless you are sure the
programme you wish to record is broadcast with
VPS/PDC ON (by selecting “ON” in the right -
hand column on the screen), then you must set up
the start time EXACTLY according to the published
TV schedule. Otherwise the timer recording won’t
take place.
RECORDING
39
38
RECORDING
System Recording
66
System Recording
Before presetting your VTR :
•
Switch on both the television and your VTR
•
Check that the date and time are correct
•
Insert the cassette on which the programme is to be recorded (safety tab intact).
Up to six programmes can be preset.
VIDEO
END:
MENU
VIDEOPLUS
CORRECT:
➛
CODE ---------
CODE:
0-9
MENU
$❷!!!➛❿
DELETE:
CLR/RST
-- ---- --:--
→
--:---- -
1 WE 1 12:00
→
12:50
PROG
1/JAN WED 21:28
SP
PR DAY START
→
STOP
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
V/P
ON
SLOW
PAUSE/STILL
STOP
F F
EJECT
REC
TIMER
CLR/ RST
F. ADV
0
REW
PLAY
CURSOR
INDEX
MENU /
SP/ LP
SAT.MONI.
A.DUB
SAT.CONT.
DISPLAY
TV/VIDEO
AUDIO
PROG.
TXT/ TV
COUNT/ TR
OK
PICTURE
Note:
The numbers next to each TV programme
listing are VIDEO Plus+ code numbers, which allow
you to programme your videorecorder instantly
with the remote control. Tap in the VIDEO Plus+ for
the programme you wish to record.
VIDEO Plus+ is a trademark of Gemstar Development Corporation. The VIDEO Plus+
system is manufactured under licence from Gemstar Development Corporation.
RECORDING
END:
MENU
** TIMER METHOD **
STANDARD
$❷!!!!!!❿
VIDEOPLUS
Press the PROG. button.
Result : The TIMER METHOD is displayed.
Note : STANDARD Timer Method is used
for the standard Timer
Programming such as TIMER
PROGRAMMING Feature, refer
to page 40 for this function.
Press the corresponding
$
or
❷
button to select the VIDEOPLUS
option and press the
❿
button to select this option.
Result:
A message is displayed to allow you to enter the VIDEO
Plus+ code.
Note :
If all six programmes have
been set, the message TIMER
IS FULL
is displayed. Refer
to page 42 if you wish to
cancel a preset recording.
Press the numeric buttons to enter the code opposite the programme
that you wish to record in your television magazine.
Note :
If you wish to correct the VIDEO Plus+ code that you are
entering.
♦
Press the
➛
button until the digit to be corrected is cleared.
♦
Enter the correct digit
Press the MENU or PROG. button
Note :
When using the VIDEO Plus+
function for the first time with
stored station, the programme
number flashes. This one time,
you must enter the station
number manually by pressing
the
$
or
❷
button. Refer to
the following page if :
♦
The programme number or times flash
♦
You wish to modify the programme.
If the programme and times are correct, press the MENU button.
Press the two TIMER buttons to activate the timer. If you wish to turn the timer
off any reason simply press the two TIMER buttons again.
Refer to page 42 if you wish to :
♦
Check that your VTR has been programmed correctly
♦
Cancel a preset recording
