Toshiba typeS, Instruction Manual

Page: 34 / 157

Chapter1 On Installing typeS Controller
6F8C1645
16
(4).
TC-net I/O loop system status LED
Displays the status of the TC-net I/O loop (see Table.1.4)
(5).
TC-net I/O loop system connector
The TC-net I / O Loop connector has LP1 connected to TC-net I/O loop 1 and LP2
connected to TC-net I/O loop 2. LP1 and LP2 are dual LC type connectors and
connect to the TC-net I/O Loop via an optical fiber cable.
Table.1.3
Status LED
Name Color Display Status
RUN Green On In operation
Off Stop or error
ERR Red On Error
Off Non-error
STS Green On TC-net is connecting
Off TC-net is not connecting
SCAN Green On Scan transmission
Off Scan transmission stopped
LP Green On LP1/LP2 Loop is normal
Off Loop is abnormal
Table.1.4
TC-net I/O loop system status LED
Name Color Display Status
ACT1 Green Blinking In transmitting and receiving (LP1)
Off There is no transmission / reception (LP1)
LNK1 Green On In inking (LP1)
Off There is no link (LP1)
ACT2 Green Blinking In transmitting and receiving (LP2)
Off There is no transmission / reception (LP2)
LNK2 Green On In linking (LP2)
Off There is no link (LP2)