background image

 

Unified Controller Vm series TC-net (TNB) Module Instruction Manual 

Safety Precautions 

On the product and this operation manual, important information for safe and correct use to 
prevent danger to the user and other people as well as property damage is described. 

Understand the following information (signs and symbols) before reading the text, and follow 
the described items. 

 

Description of signs

 

Sign 

Description 

DANGER 

Indicates that failure to avoid it will result in an immediate risk of death 
or serious injury

(*1)

WARNING

 

Indicates that failure to avoid it will result in a risk of death or serious 
injury

(*1)

CAUTION

 

Indicates that failure to avoid it will result in a risk of light or medium 
injury

(*2)

 or only property damage

(*3)

*1:   

A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shock, broken bones, or intoxication that will have aftereffects 

and require hospitalization or long-term hospital visits for healing. 

*2:   

An injury indicates an injury, burn, or electric shock that does not need hospitalization or long-term hospital visits for healing. 

*3:   

A property damage indicates consequential damage in terms of breakage of properties or materials. 

 

 

Description of symbols

 

Symbol 

Meaning 

 

Prohibited 

Indicates “Prohibition” or “You must not do”. 

Specific details are indicated near the symbol    with pictures and text. 

 

Mandatory 

Indicates “Mandatory Action” or “Do as indicated”. 

Specific details are indicated near the symbol    with pictures and text. 

(Note)  Descriptions of Prohibition, Mandatory Action, and Warning vary depending on the display on the main 

unit. 

 

 

 

Summary of Contents for TNB21




































































































Reviews: