41
Operations
40
Notes
• You can register a logo from computer input only.
• The area that can be registered is 512
×
384 dots at the center of the screen. To
register a company logo, prepare the image within the limit.
• Only one logo can be registered. When a new image is registered, the old one is
erased.
• The time needed to register or display the image varies depending on the data size.
• If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
<
Display style
>
Select the size of the registered logo.
: Displays the registered image in original size at center of the screen.
: Displays the registered image by enlarging fully in the screen.
(As processed digitally, the image quality is degraded.)
<
Background
>
Sets background color when [
Center
] is selected for the logo [
Display style
].
<
Logo confirmation
>
You can preview the registered logo.
<
Reset logo
>
You can reset the registered logo, display style and background to the factory
setting. (The logo set for the start-up screen and background is reset.)
Note
• If you use the screen size setting function on commercial video software,
broadcast or cable-broadcasting programs to display images with the varying
aspect ratio except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
[
Up/down shift
]
Shifts the projected image vertically when [
Screen size
] is [
Wide
].
[
Blackboard mode
]
Projects the image in colors more like projecting on a screen.
Precaution
• The projected image may differ depending on the type, color, and material of the
blackboard and wall even if the selected color is the same as the projected
screen.
[
Background
]
• TOSHIBA is set for [
Logo
] by factory setting.
• If user’s logo has been registered, it is displayed when [
Logo
] is set for
background.
[
Start-up screen
]
If user’s logo has been registered and this setting is [
On
], the logo is displayed at
start-up.
[
User logo
]
Registers a part of the image that is input from computer, as a stationary picture
and displays it as a logo at start-up and when no signal is input.
<
Logo registration
>
How to register user logo
1
Select [User logo] in the Display setting menu, and press the
or
button.
2
Select <Logo registration> from the displayed menu list and
press the
button.
3
The registration area is displayed for confirmation. Select [OK]
or [Cancel] and press the
button.
• If the registered picture does not fall within the display area, operate the
computer to scroll the screen.
4
Select [Yes] to register and press the
button.
5
Registration starts.
• A message is displayed while registration is in process.
Using the menus (Continued)
Summary of Contents for TLP X2500
Page 31: ......
