Toshiba TECRA M5 Maintenance Manual Download Page 181

Page: 181 / 398

3.24 Floppy Disk Drive Utilities

3 Tests and Diagnostics

TECRA M5 Maintenance Manual (960-542)

[CONFIDENTIAL]

3-51

3.24 Floppy Disk Drive Utilities

3.24.1 Function

Description

This function formats the FDD, copies the floppy disk and displays the dump list for both the
FDD and HDD.

FORMAT

NOTE: This program is only for testing a floppy disk drive. It is different from the

Toshiba MS-DOS FORMAT command.

This program can format a floppy disk in the following formats:

(a)

2DD: Double-sided, double-density, double-track, 96/135 TPI, MFM mode,
512 bytes, 9 sectors/track.

(b)

2HD: Double-sided, high-density, double-track, 96/135 TPI, MFM mode, 512
bytes, 18 sectors/track.

COPY

This program copies data from a source floppy disk to a target floppy disk.

DUMP

This program displays the contents of the floppy disk and the designated sectors of
the hard disk on the display.

HDD ID READ

This program reads the hard disk ID and displays hard disk information.

Summary of Contents for TECRA M5















































































































































































































































































































































































































Search results

Summary of Contents for TECRA M5

Reviews:

Related manuals for TECRA M5

Brands by name

Popular brands

Toshiba TECRA M5, Maintenance Manual

Search results

Summary of Contents for TECRA M5

Reviews:

Related manuals for TECRA M5

Brands by name

Popular brands