Toshiba TECRA M5 Maintenance Manual Download

Page: 199 / 398

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program

3 Tests and Diagnostics

TECRA M5 Maintenance Manual (960-542)

[CONFIDENTIAL]

3-69

Table 3-5 Error message

Message Contents

Invalid BD_ADDR (all 00)

0x000000000000

Invalid BD_ADDR (all FF)

0xFFFFFFFFFFFF

Invalid BD_ADDR (bit0=1)

bit40=1b

Invalid BD_ADDR (bit1=1)

bit41=1b

Invalid BD_ADDR (define in the file)

Defined BD_ADDR

If the machine detects a malfunction, it indicates the error code as shown
below.

The error code begins with the least significant digit.

Error

code

Table 3-6 Error code for Bluetooth test (BD_ADDR) (1/2)

Error code

Meaning

0x01

Unknown HCI Command.

0x02

No Connection.

0x03

Hardware Failure.

0x04

Page Timeout.

0x05

Authentication Failure.

0x06

Key Missing.

0x07

Memory Full.

0x08

Connection Timeout.

0x09

Max Number Of Connections.

0x0a

Max Number Of SCO Connections To A Device.

0x0b

ACL Connection already exists.

0x0c

Command Disallowed.

0x0d

Host Rejected due to limited resources.

0x0e

Host Rejected due to security reasons.

0x0f

Host Rejected due to remote device is only a personal device.

0x10

Host Timeout.

0x11

Unsupported Feature or Parameter Value.

0x12

Invalid HCI Command Parameters.

0x13

Other End Terminated Connection: Used Ended Connection.

0x14

Other End Terminated Connection: Low Resources.

0x15

Other End Terminated Connection: About to Power Off.

0x16

Connection Terminated by Local Host.

0x17

Repeated Attempts.

0x18

Paring Not Allowed.

0x19

Unknown LMP PDU.

0x1a

Unsupported Remote Feature.

Summary of Contents for TECRA M5















































































































































































































































































































































































































Search results

Summary of Contents for TECRA M5

Reviews:

Related manuals for TECRA M5

Brands by name

Popular brands

Toshiba TECRA M5, Maintenance Manual

Search results

Summary of Contents for TECRA M5

Reviews:

Related manuals for TECRA M5

Brands by name

Popular brands