Toshiba Tecra A3X, Maintenance Manual

Page: 77 / 408

2.4 System Board Troubleshooting 2 Troubleshooting Procedures
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 2-21
Table 2-3 D port status (3/9)
D port
status
Inspection items Details
Searching entry of
“CHGBIOSA.EXE/CHGFIRMA.EXE” from the
loaded sector
Loading EXE header of “CHGBIOSA.EXE
/CHGFIRMA.EXE”,
Key input when an error occurred
Executing “CHGBIOSA.EXE”/”CHGFIRMA.EXE”
IRT
F100H IRT_START
Cache controll for HyperThreading
Disabling cache
Initializing H/W
(before recognizing DRAM)
Initializing MCHM
Initializing ICH4M.D31.Func0
Initializing ICH4M.D31.Func1
Initializing USB.Func0,1,2,7
Initializing ICH4M.D31.Func3
Initializing ICH4M.D31.Func5
Initializing FLUTE
Initializing the channel 1 of a PIT (set 30 µs for refresh interval)
F101H IRT_INI_SPREG_END
Checking type and size of DRAM (at
Cold boot only) When no suport memory is connected, HLT after
beep
HLT when DRAM size is 0
Testing stack area of SM-RAM HLT when impossible to use as stack
F102H IRT_STACK_TEST_END
Cache Configuration
Enabling L1 and L2 cache
Access test of CMOS
(at Cold boot only)
(HLT when an error occurred)
Checking battery level of CMOS
CheckSum check of CMOS
Initializing CMOS data (1)
Setting up IRT status
(Setting of Boot status and IRT Busy Flag, The
bit left is 0)
Storing DRAM size