4.13 Parallel port board / Serial port board / S-Video board
4 Replacement Procedures
Installing the S-Video board
The following describes the procedure for installing the S-Video board (See Figure 4-27, 4-
30).
1.
Install the
serial port board
on the base assembly.
2.
Connect the
USB harness
to the connector PJ4610 and the
S-Video harness
to the
connector PJ5640 on the S-Video board.
3.
Pass the
DC-IN harness, USB harness
and
S-Video harness
along the guide of base
assembly.
CAUTION:Pass the cables under harness holder as the following figure.
DC-IN harness
USB harness
S-Video harness
4.
Install the
harness holder
and secure it with the following
screws
.
•
M2.5x4B THIN BIND screw
x2
5.
Set the
core
of the DC-IN harness on the harness holder and install the
DC-IN jack
in the slot of the base assembly.
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL]
4-45
Summary of Contents for Tecra A3X
