Toshiba TEC EO1-32003 Owner'S Manual Download

Page: 71 / 96

13. OPERATING PROCEDURES

13.4 PRINT COUNT OPERATION

13- 7

Example B)

When operating in Fix or By Count mode.

Place a commodity
on the platter.
(Ex. 1.320 lb.)

The label is issued with the
backing paper attached.

The label is issued.

When all the specified numbers of
labels are being issued.

SPLIT PRICE operation

Press :

Set the number of labels.
(Max. 99)

Press :

Enter the PLU #.

Press :

Press, to save the
PLU data :

MANUAL :

: AUTO

Batch

On-demand

[FIX]

Remove the commodity
from the platter.

Repeat until the specified
number of labels are issued,
alternating the commodity
placed on the platter.

When the last label
is issued :

Press, to clear the
Preset Count.

Press, to regain the
initial status.

The specified numbers of
labels are issued in
succession with the
backing paper attached.

The next label is issued
after removing the current
label.

[BY COUNT]

Batch

On-demand

Suspend the batch
printing.

Resume the label
issue.

Clear the preset
count.

Press :

PRESET

COUNT

PLU

SAVE

PRT

Summary of Contents for TEC EO1-32003

































































































Search results

Summary of Contents for TEC EO1-32003

Reviews:

Related manuals for TEC EO1-32003

Brands by name

Popular brands

Toshiba TEC EO1-32003, Owner'S Manual

Search results

Summary of Contents for TEC EO1-32003

Reviews:

Related manuals for TEC EO1-32003

Brands by name

Popular brands